Cutting Machine
The plate shearing machine is a machine which shears a plate with reciprocating straight motion of one blade relative to the other. The rational blade gap is adopted to apply a shear force to metal plates of various thickness by means of moving upper blade and fixed lower blade so that the plates are separated according to the required dimension.
Device Parameters
| Equipment | Width | Length （cut） | Thickness | Other Fabrication Abilities | End Product | Note | Tolerance | Thickness | Upper Slit | Lower Slit | |
| （cut） | （Cut） | ||||||||||
| Cutting Machine | ≤3000 | ≤6200 | ≤12 | As required | / | Min Width:20mm, Min Thickness:2mm | Min Width for 2-4㎜:20㎜ | ±2mm | Cold rolled plate with thickness of 1.5-3 mm,width of less than 50 mm, lengthof 2000mm or more needs to be leveled | ||
| Min Width for 5-6㎜:30㎜ | |||||||||||
| Min Width for 8㎜ is 50㎜ | Hot rolled palte with widt of 3-8mm,width of less than 80mm,length of 1500mm and more needs to be leveled | ||||||||||
| Min Width for 10㎜ is 70㎜ | |||||||||||
| Thickness for palte :0.5㎜ | If the width of the tailings is less than 100mm, the material needs to be fed. The trimming side cannot be less than 3 times the thickness of the board.。 | Hot rolled plate with width of 10-12mm,length of more 1500mm needs to be leveled | |||||||||
Machine Photo
In 2016, it signed a strategic cooperation agreement with major domestic stainless steel factories for the sales of medium and heavy plates and special steel products, which also enabled the company to have new and brighter sales varieties. At the same time, it provides one-stop service for cutting, cutting, forming and and surface processing of stainless steel.
Copyright © Jiangsu New Qiujing Stainless Steel Co., Ltd. All Rights Reserved Sitemap | Technical Support: 
