Stainless steel Super Duplex 2507 is designed to handle highly corrosive conditions and situations were high strength is required. High molybdenum, chromium and nitrogen content in Super Duplex 2507 help the material withstand pitting and crevice corrosion. The material is also resistant to chloride stress corrosion cracking, to erosion corrosion, to corrosion fatigue, to general corrosion in acids. This alloy has good weldability and very high mechanical strength.
Stainless steel Super Duplex 2507 is designed to handle highly corrosive conditions and situations were high strength is required. High molybdenum, chromium and nitrogen content in Super Duplex 2507 help the material withstand pitting and crevice corrosion. The material is also resistant to chloride stress corrosion cracking, to erosion corrosion, to corrosion fatigue, to general corrosion in acids. This alloy has good weldability and very high mechanical strength.
Product Description
| Grade | ASTM S32750, 2507/ GBS25073,022Cr25Ni7Mo4N |
| Available Standard | ASTM, AISI, SUS, JIS, EN, DIN, GB, ASME, etc. In general, ASTM A240/A240M or as your requirements |
| Certification | MTC from mill |
| Brand/MILL | TISCO,JISCO,PZSS,BAO Steel,LIANZHONG ,etc |
| Treatment | Hot Rolled |
| Thickness | 3mm-16mm |
| Width | ≤2000mm |
| Length | 1000 - 6000mm or as your request |
| Finish | 2B/HL/8K mirror |
| Edge | Slit edge & Mill edge |
| Standard Size | 1500mm*6000mm |
| 1800mm*6000mm | |
| 2000mm*6000mm |
Above is our normal size of 2507 stainless steel sheet plate, but are capable of shearing or custom leveling to your required lengths and widths.
Specification
2507 stainless steel Chemical Composition
| Grade2507 | |||||||||||
| Element | Cr | Ni | Mo | Mn | Si | Cu | N | P | C | S | Fe |
| Percentage | 24 – 26 | 6 – 8 | 3 – 5 | 1.20 max | 0.80 max | 0.50 max | 0.24 – 0.32 | 0.035 max | 0.030 max | 0.020 max | Balance |
Physical Properties
2507 Stainless Typical physical properties for annealed grade 316 stainless steels:
| Grade | Density (kg/m3) | Melting point |
| 2507 | 780 | 1350°C |
2507 Stainless Steel Grade Specification Comparison
| Grade | CN GB/T20878-2007 | USA ASTMA959-2004 | EUROPE EN10088:1-1995, EN10095-1999 | |||
| S25073 | 022Cr25Ni7Mo4N | S32750 | 2507 | X2CrNiMoN25-7-4 | 1.4410 | |
Applications
Fans
Wire
Fittings
Cargo tanks
Water heaters
Storage vessels
Hydraulic piping
Heat exchangers
Hot water tanks
Spiral wound gaskets
Lifting and pulley equipment
Propellers, rotors, and shafts
Power
Marine
Chemical
Pulp and paper
Petrochemical
Water desalinization
Oil and gas production
In 2016, it signed a strategic cooperation agreement with major domestic stainless steel factories for the sales of medium and heavy plates and special steel products, which also enabled the company to have new and brighter sales varieties. At the same time, it provides one-stop service for cutting, cutting, forming and and surface processing of stainless steel.
Copyright © Jiangsu New Qiujing Stainless Steel Co., Ltd. All Rights Reserved Sitemap | Technical Support: 
